Hi-Force JAH 1230 Manuel - Sayfa 4

Jacks Hi-Force JAH 1230 için çevrimiçi göz atın veya pdf Manuel indirin. Hi-Force JAH 1230 4 sayfaları. Aluminium jacks

TDS 1331

OPERATING POSITIONS

The Jack should be used in the two positions shown below, ONLY. See

Figure 3.

STROKE LIMITER

The Jack is factory fitted with an internal by-pass valve which prevents the

jack piston exceeding maximum stroke. If the jack is operated in this

condition, oil passes back to the reservoir. If operation is continued, some oil

may by-pass the jack stop ring and appear on the top of the jack. Cease

operating jack and wipe off surplus oil.

OPERATING ENVIRONMENT

The jack is intended for use in industrial environments, in or outdoors between

temperatures of -20 to +50°C. Outside these parameters, consult Hi-Force

Ltd, before use.

0806