Great Lakes GL36SR Kurulum Talimatları Kılavuzu - Sayfa 4
Raflar ve Standlar Great Lakes GL36SR için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Great Lakes GL36SR 12 sayfaları. 19" eia wall mount swing rack
Ayrıca Great Lakes GL36SR için: Kurulum Talimatları Kılavuzu (8 sayfalar)
Sayfayı Yazdır
SPECIFICATIONS
SR
Certifications: UL Listed 2416 and UL 60950-1
Construction: The 24SR and 36SR frames are made of 14 Ga. steel.
The 48SR frame is made of 12 Ga. steel.
Finish: Black Textured Powder Coat
Grounding: Lug and hardware supplied for side brace and swing frame
Rail Type: Tapped #12-24 mounting holes, front and rear
Total Maximum Load Capacity: 50 lbs. for all sizes
PARTS LIST
COMPONENT
TOP AND BOTTOM BRACE .........................................................................................................................2
SWING FRAME ASSEMBLY ..........................................................................................................................1
SIDE BRACE ASSEMBLY ..............................................................................................................................2
REAR BRACE PANEL .....................................................................................................................................1
#10-32 ACORN NUT .....................................................................................................................................4
#10-32 X 1/4 PHIL PAN HD SCREWS, TYPE 23, BLACK .......................................................................8
1/4-20 X 3/4"L FLAT HEAD SCREW W/ NYLON LOCKING PELLET .....................................................2
BLACK NYLON SPACER (0.50 OD, 0.26 ID 0.187 TH) ...........................................................................2
EQUIPMENT MTG. HARDWARE: #12-24 X 1/2" PHIL PAN HD SCREWS, TYPE 23 ..................... 50
GROUNDING KIT
2 BARREL GROUND LUG ............................................................................................................................1
1/4-20 X 5/8" PHILLIPS HEAD SCREW WITH EXTERNAL TOOTH WASHER ......................................2
1/4-20 KEPS NUT WITH EXTERNAL TOOTH LOCK WASHER ...............................................................3
JUMPER WIRE .................................................................................................................................................1
TOOLS REQUIRED: 3/8" NUT DRIVER, PHILLIPS HEAD SCREWDRIVER
Special Note: Item #7 used to mount equipment to swing rack.
4
QTY.