Gaggenau CE 261 Kullanım Kılavuzu - Sayfa 10

Setüstü Ocak Gaggenau CE 261 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Gaggenau CE 261 16 sayfaları. Glass ceramic cooktop
Ayrıca Gaggenau CE 261 için: Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Quick boil timer

All of the cooking zones have quick boil timer. By

activating the quick boil timer, the heat setting that is

set increases to the maximum setting for a few

minutes. This means that the simmering temperature

for the food is reached sooner.

Once the boiling time has elapsed, the appliance

automatically switches to the heat setting that was set.

You can set the duration of the boiling time.

You cannot activate the quick boil timer in heat setting

Switching on automatic boil start

The hob must be switched on with the main switch.

Select the cooking zone by touching the

respective symbol in the display panel.

Select the required heat setting within 5 seconds.

The selected heat setting lights up in the heat

setting display.

Touch the A symbol within 5 seconds.

The heat setting alternates with A in the display.

You can change the boil start time within 5

seconds. The default is 3 minutes. You can use

the number buttons to set a time between 1 and

20 minutes.

You can set different boil start times for each separate

hotplate. If you activate automatic boil start again, the

previously selected boil start time is suggested.

After the food has been brought to the boil, only the

ongoing cooking setting remains lit on the display.

Switching off the quick boil timer

You can also switch off the quick boil timer before the

boiling time has elapsed (e.g. because the food is

cooking too quickly).

Select the cooking zone.

Touch the A symbol within 5 seconds.

The cooktop switches back to the heat setting

that was set.

Childlock

You can use the childlock to prevent children from

switching on the cooking positions.

Note: To ensure that you can activate the childlock,

you must first enable this function in the options menu

(see Options menu).

Activating the childlock

Switch on the cooktop at the main switch. Do not

select any cooking zones or the timer.

After approx. 10 seconds, the K symbol is

displayed above the @ symbol.

Touch the @ symbol. A signal sounds. Press and

hold the @ symbol until another signal sounds.

The cooktop switches off. The K display flashes for

approximately 10 seconds. The childlock is activated.

Deactivating the childlock

To deactivate the childlock again, proceed in the same

way as for activating the childlock.