Hi-Force HPS50 Kullanım Talimatları Kılavuzu
Kaldırma Sistemleri Hi-Force HPS50 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Hi-Force HPS50 14 sayfaları. Single-acting, low height pad cylinders
Sayfayı Yazdır
This 'Original instructions' document assumes that the operator carrying out any operation with this
product is trained and competent to do so. This manual does not attempt to cover all details or variations
in the equipment. Nor does this manual claim to provide for every possible contingency met in connection
with the installation, operation, or maintenance thereof. Should further information be desired, or should
a particular problem arise which is not covered in sufficient detail, the matter should be referred to
Hi-Force.
OPERATING INSTRUCTION MANUAL
HPS SERIES | SINGLE-ACTING, LOW HEIGHT PAD
Hi-Force HPS Series Single-Acting, Low Height Pad Cylinders are designed for use in confines spaces
wheres both height and footprint a factors. HPS cylinders are available in capacities ranging from 4.5 to
147 tonnes and stroke length ranging from 6 to 166mm. All cylinders have a maximum working pressure of
700 bar (10,000 psi). This manual applies to Hi-Force HPS Series Cylinders ONLY. It contains the latest
product information available at the time of publication and approval. For information relating to the servicing
of an HPS cylinder, see the servicing instructions, which are available on the Hi-Force website. Hi-Force
reserves the right to make changes to this document at any time without notice.
Operating Instruction Manual:
CYLINDERS
1
OM-HPS-01
Serial Numbers:
From: AF0316