Great Lakes WR4 Kurulum Talimatları Kılavuzu - Sayfa 3

Raflar ve Standlar Great Lakes WR4 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Great Lakes WR4 8 sayfaları. Ul60950-1/ul2416 e series equipment cabinet/rack

INSTALLATION

Receiving and Unpacking
Inspect and report any damage before receiving. Unpack the wall
mount by carefully removing the corrugated carton and corners. Avoid
damaging the wall mount when removing packaging.
WARNING: Only trained service personnel should be used to unpack
and move the enclosure. Also, be sure you have a sufficient number of
service personnel. Do not attempt to move enclosures by yourself.
WARNING: Be careful when moving enclosures before installation.
Sudden stops and starts, excessive force, obstructed routes, and
uneven floor surfaces may cause the enclosure to topple over.
Loading Equipment
WARNING: Only install equipment after the Great Lakes WR Wall
Mount has been properly secured. Do not move the Great Lakes WR
Wall Mount assembly while loaded.
To maintain a uniform distribution of the mechanical load in the WR,
load the heaviest equipment first, at the bottom and load the lighter
units at the top. Rated or maximum load capacities for the Great Lakes
WR Wall Mounts are as follows: WR2: 50 lbs., WR4: 75 lbs.
SERVICE
The Great Lakes Wall Mount should be repaired by personnel trained
by Great Lakes, or returned to Great Lakes for repair or replacement.
Contact Great Lakes Technical Support at 814.734.7303 or at
greatcabinets.com

GENERAL INFORMATION

WR2: 4"H x 19.75"W x 21.63"D, 2 RMU
WR4: 7.5"H x 19.75"W x 21.63"D, 4 RMU
Certifications: UL Listed 2416 and UL 60950-1
Construction: Steel
Finish: Black Textured Powder Coat
Grounding: Studs on inside back panel
Rail Type: Tapped #10-32
3