Airwheel R5 Kullanıcı Kılavuzu - Sayfa 11
Bisiklet Airwheel R5 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Airwheel R5 17 sayfaları.
Sayfayı Yazdır
Adjustment and maintenance:
1.
Newly purchased vehicles should be adjusted in good condition, if there is any question, please refer to
the aftersales staff.
2.
The adjustment method of the brake is the same as the ordinary bicycle. The key is not only to be
able to brake effectively, but also to release the brake without block (otherwise it will consume a large
amount of electric energy) and make sure the brake-power off function is effective.
3.
To replace tires, it is the same as ordinary bicycle. Due to the rear wheel hub and circuit, riders need
to pay attention to the lines and press the two screws in the rear axle. The torque of the rear wheel is
recommended ≥ 30N.m, the front wheel ≥ 18N.m.
4.
Have a maintenance and a comprehensive examination every 800 km. check whether the front and
rear wheel screw is locking, check whether the pattern of cover tyre is worn; check whether the tire
pressure is appropriate, the drive system is smooth, and each part of the joint is normal: check whether
the brake line zip-fastener is used in lubrication. And inject suitable amount of lubricant to the central
axis, the front axle, rear axle, flywheel, fork, rotating parts and brake wiring. 40# oil and butter as a
lubricant are recommended.
5.
In the use and maintenance, if you find that you cannot solve the problem, please contact the aftersales staff.
Unauthorized demolition of Airwheel caused the failure and damage, is not in the company's free warranty.
6.
When the vehicle is used for a period of time, it should be requested professional or designated service
station for a comprehensive inspection and adjustment to ensure the comfort, safety and normal service life.
Chain adjustment:
Adjust the nut left or right to find the suitable looseness. When adjusting the chain, it must also be
aligned with the front and rear sprockets in a straight line. After adjustment, refasten the nut in the rear
wheel, lock and adjust nut to have a final check. The chain sag between the two chain wheels should be
10~15mm. Clip mouth is back to install.
Battery usage:
1.
Auxiliary charge: for short delivery time, users can directly use the battery. If the delivery time is longer
(2 months or longer), the battery will lose power during storage and transport. It is better to charge the
batter before use. To charge it requires plugging the exclusive charge to the battery charging hole and
connecting AC220V power source for 2~4 hours until the charger is full.
2.
The normal charge of the battery: the operation of R5 is also the discharge process of the battery. The
battery should be charged immediately after the use of the power-assisted vehicle.
3.
Please turn off the power if not riding.
4.
The connectors of the battery box should be fixed tightly according to the requirements (the battery box
connecting line has been reliably connected before ex-factory). Loosen or wrong connection will cause
the related parts abnormal and lead to serious damage.
5.
Lithium batteries can not be close to open fire or high temperature heat source, can not be thrown into
water and can not be exposed in the sun in high temperature season.
6.
Do not disassemble and decompose, as the internal part of them lithium battery has been packaged intactly.
7.
The waste lithium battery of the product is to be recycled by the enterprise or dealer, and the
government designated outlets. Please do not throw away the waste battery, so as not to pollute the
environment.
Charger usage:
1.
Carefully check whether the charger's rated input voltage (AC220V) and the grid voltage is consistent.
2.
When the vehicle needs charging,firct connect the battery to the charger, and then connect the charger
to AC power source .The charging indicator is red meaning it is charging. When it turns green, it will
take 15 minutes to be fully charged. The charging time is about 2-4 hours (depending on the quantity of
remaining battery).
- 09 -