Great Lakes GL840N12-3042-SS Kurulum Talimatları Kılavuzu - Sayfa 3

Muhafaza Great Lakes GL840N12-3042-SS için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Great Lakes GL840N12-3042-SS 16 sayfaları. Nema enclosures

Sayfayı Yazdır

WHAT'S INCLUDED

• NEMA unit (assembled)

• 3/8" SQ. hole mounting rails (includes M6 cage nuts and 12mm

long screws)

NEMA weight capacity: 2000 lbs.

INSTALLATION

Receiving, Unpacking, and Removing the NEMA Enclosure

from the Pallet

Inspect and report any damage before receiving. Unpack the enclosure

by carefully removing the corrugated carton and corners. Avoid

damaging the enclosure when removing packaging.

WARNING: Only trained service personnel should be used to remove

the enclosure from the pallet. Also, be sure you have a sufficient

number of service personnel. Do not attempt to move enclosures

by yourself.

WARNING: Be careful when moving enclosures before installation.

Sudden stops and starts, excessive force, obstructed routes, and

uneven floor surfaces may cause the enclosure to topple over.

Loading Equipment

WARNING: Only install equipment after the NEMA Enclosure has been

properly secured. Do not move the NEMA Enclosure assembly while

loaded.

Once in place at the desired/intended location, deploy the leveling feet

for maximum stability.

Rated or maximum load capacity for the NEMA Enclosure is 2000

pounds on the floor.

To maintain a uniform distribution of the mechanical load in the NEMA

Enclosure, load the heaviest equipment first, at the bottom of the

NEMA Enclosure and load the lighter units at the top.