Daxten SCOUTKVM Kurulum Kılavuzu - Sayfa 5

Anahtar Daxten SCOUTKVM için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Daxten SCOUTKVM 7 sayfaları. Soho kvm switches
Ayrıca Daxten SCOUTKVM için: Broşür (2 sayfalar)

Sayfayı Yazdır

Keyboard Hot Key commands

To send Hot Key commands to the SCOUTkvm switch, press and release Ctrl

seconds. Press a command key for the desired effect. The following commands are supported:

First Key

Second Key

Ctrl

In Auto-Scan mode, the image shown on the monitor will automatically switch to the next computer.

The delay is user definable (see Table above). After the last computer has been shown, the first

computer will be shown again.

Note: In this mode there is no mouse or keyboard control.

Press any key to exit the Auto-Scan mode. The SCOUTkvm switch will stop at the last PC shown.

The Hot Key sequence can be changed if required. To change from the factory default of Ctrl

Ctrl , please use the following sequence:

[OLD HOT KEY] [NEW HOT KEY]

Ctrl

for example:

New Hot Key: Scroll Lock Scroll Lock

The following combinations are available for Hot Keys:

Ctrl

Ctrl (default)

Factory Reset

On the side of the SCOUTkvm there is a reset button, which will return all settings to the factory

default.

Optional Power Supply

The optional Power Supply is only required on the rare instance where a PC does not provide the

SCOUTkvm switch with enough power through the keyboard and mouse port. If you require an

external power supply, please contact Daxten or an authorised reseller.

Command Key

1 , 2 , 3 or 4

↑

↓

S 0

S 1

S 2

S 3

Ctrl

Scroll Lock Scroll Lock

Alt Alt

Scroll Lock Scroll Lock

Command Result

Switches to the desired PC

Switch to previous PC

Switch to next PC

Auto-Scan mode ON

Auto-Scan mode OFF

Scan 8 Seconds (default)

Scan 15 Seconds

Scan 30 Seconds

Scan 60 Seconds

Shift Shift

Ctrl within 2