Dynabrade 48500 Güvenlik, Kullanım ve Bakım Kılavuzu - Sayfa 4
Sander Dynabrade 48500 için çevrimiçi göz atın veya pdf Güvenlik, Kullanım ve Bakım Kılavuzu indirin. Dynabrade 48500 4 sayfaları. 2" disc sander 7 offset, rear exhaust
Sayfayı Yazdır
LIFETIME WARRANTY
To validate Dynabrade Lifetime Warranty, you must register each tool at: www.dynabrade.com. Registration of each tool at website is required.
Dynabrade will not honor Lifetime Warranty on unregistered tools. Please view the entire Lifetime Warranty Policy at : www.dynabrade.com.
MACHINE SPECIFICATIONS
Model
Speed
48500
25,000 RPM
.4 hp (298 W)
48503
25,000 RPM
.4 hp (298 W)
Additional Specifications: Air Inlet Thread 1/4" NPT • Hose I.D. 1/4" (6 mm)
Sound Level is the pressure measurement according to the method outlined in ISO regulation ISO-15744
OPTIONAL ACCESSORIES
Motor Tune-Up Kit
•
Part No. 96541
FIGURE 1
.75" (19 mm)
MODELS: 48500 & 48503
ADJUST SCREW (PART NO. 95710) DEPTH TO .75"
(19 MM) TO ATTAIN PROPER SPEED OF 25,000 RPM
REFERENCE CONTACT INFORMATION
American National Standards Institute (ANSI)
1899 L Street, NW, 11th Floor • Washington, DC 20036 • Tel: 1 (202) 293-8020
Compressed Air & Gas Institute (CAGI)
1300 Sumner Ave. • Cleveland, OH 44115-2851
Tel: 1 (216) 241-7333 • Fax. (216) 241-0105
European Committee for Standardization (EN)
Rue de Stassart 36 • B - 1050 Brussels, Belgium
DYNABRADE, INC.
8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
© DYNABRADE, INC., 2012
Power
Sound
Air Consumption
73 db(A)
25 SCFM (708 LPM)
73 db(A)
25 SCFM (708 LPM)
Includes assorted parts to help
maintain and repair motor.
Overhose Assembly
•
Redirects exhaust away from operator.
Part No. 94994
•
For use with standard exhaust models only.
Part No. 94995
•
For use with extended exhaust models only.
Screw
Throttle Body
PRINTED IN USA
Air Pressure
90 PSIG (6.2 Bars) 1.3 lb. (0.59 kg)
90 PSIG (6.2 Bars) 1.1 lb. (0.49 kg)
Dynabrade Air Lube
•
•
•
•
SPECIAL REPAIR TOOLS
Socket
•
3/8" Drive
•
For use on
throttle body.
Part No. 96393
Repair Collar
•
Used to protect right angle
and 7˚ offset housings
when placed in a vise.
Part No. 96461
Lock Ring Tool
Part No. 50971
•
For removal/tightening
of 01560 Lock Nut.
International Organization of Standards (ISO)
Case postale 56 • CH-1211 Geneva 20
Tel: + 41 22 749 01 11 • Fax: + 41 22 749 09 47
Government Printing Office (GPO)
Superintendent of Documents • Attn: New Orders
P.O. Box 371954 • Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
www.dynabrade.com
Weight
Length
8.7" (222 mm)
7.2" (183 mm)
Formulated for pneumatic equipment.
Absorbs up to 10% of its weight in water.
Prevents rust and formation of sludge.
Keeps pneumatic tools operating longer
with greater power and less down time.
Part No. 95842: 1pt. (473 ml)
Part No. 95843: 1 gal. (3.8 L)
Hex Key Wrench
•
12 mm hex
•
Use in housing core or
air inlet.
Part No. 96399
Crowfoot Wrench
•
3/8" Drive
•
34 mm
•
Use on throttle body,
housing core & lock nuts.
Part No. 96460
PD12.21_06/12
Height
3.9" (98 mm)
3.9" (98 mm)