Dynabrade 52596 Manuel - Sayfa 8

Sander Dynabrade 52596 için çevrimiçi göz atın veya pdf Manuel indirin. Dynabrade 52596 8 sayfaları. 5" vacuum right angle sander

Sayfayı Yazdır
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
Dynaswivel
®
•
Swivels 360° at two locations which allows an
air hose to drop straight to the floor, no matter
how the tool is held.
95461 3/8" NPT.
Dynabrade Angle Gear Oil
•
Specifically formulated to saturate wick system in right
angle gear head.
95848: 2.5 oz. tube
95541: Gear Oil Gun
Male Plug - 3/8" NPT
•
Provides up to twice the air flow
compared to standard plug design.
•
Plug has "ported" design to prevent
"starving" of the air tool.
98263: 3/8" Body
96005: 1/4" Body
Model
Motor
Number
hp (W)
52596
1.3 (969)
Additional Specifications: Air Inlet Thread 3/8" NPT • Hose I.D. 3/8" (10mm)
Sound Level is the pressure measurement according to the method outlined in ISO regulation ISO-15744
Expect a gear life
of 500 hours
into lubrication
minimum, with
proper lubrication.
Reference Contact Information
1. American National Standards
Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2008

Optional Accessories

Machine Specifications

Motor
Sound
Maximum Air Flow
RPM
Level
SCFM (LPM)
12,000
80 dB(A)
42 (1189)
Special Greasing Instructions
Apply 2-3
• Lubricate wick system through the angle gear oil fitting with 2-3 plunges for every 24
plunges
hours of use, to achieve maximum gear life. Prime pump to insure good oil flow.
fitting every
24 hours of
operation.
Important: Use only the recommended angle gear oil for the wick system.
Do not contaminate the wick with any other oil or grease product. Insure that all 3 plunges of
oil are injected through the fitting.
(Order 95848 Gear Oil and 95541 Gun)
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
96100 Motor Tune-Up Kit
Spindle
Air Pressure
Thread
PSIG (Bars)
Pound (kg)
5/8-11" male
90 (6.2)
3. Power Tool Institute, Inc.
P.O. Box 818
Yachata, Oregon 97498-0818
Tel: 1 (503) 547-3185
Fax: 1 (503) 547-3539
•
Includes assorted parts to help
maintain and repair motor.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
95842: 1pt. (473 ml)
95843: 1gal. (3.8 L)
Wrenches
98283 - Open End (1-5/8")
95281 - Open End (19mm)
95049 - Hex Key (3/16")
Additional Repair Tools (Not shown)
96244 - Bearing Press Tool
96243 - Bearing Press Tool
96346 - Bearing Separator
96208 - Repair Collar
Weight
Length
Height
Inch (mm)
Inch (mm)
5.5 (2.5)
16-1/8 (410)
3-7/8 (101)
4. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
DYNABRADE
PRINTED IN USA
®