Dynabrade 52635 Manuel - Sayfa 8
Sander Dynabrade 52635 için çevrimiçi göz atın veya pdf Manuel indirin. Dynabrade 52635 8 sayfaları. 4", 5" right angle sanders
Sayfayı Yazdır
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
Dynaswivel
®
•
Swivels 360° at two locations which allows an
air hose to drop straight to the floor, no matter
how the tool is held.
95461 3/8" NPT.
Dynabrade Angle Gear Oil
•
Specifically formulated to saturate wick system in right
angle gear head.
95848: 2.5 oz. tube
95541: Gear Oil Gun
Male Plug - 3/8" NPT
•
Provides up to twice the air flow
compared to standard plug design.
•
Plug has "ported" design to prevent
"starving" of the air tool.
98263: 3/8" Body
96005: 1/4" Body
Model
Motor
Number
hp (W)
52631
1.3 (969)
52634
1.3 (969)
52635
1.3 (969)
Additional Specifications: Air Inlet Thread 3/8" NPT • Hose I.D. 3/8" (10mm)
Sound Level is the pressure measurement according to the method outlined in ISO regulation ISO-15744
Expect a gear life
of 500 hours
into lubrication
minimum, with
proper lubrication.
Reference Contact Information
1. American National Standards Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2007
Optional Accessories
Machine Specifications
Motor
Sound
Maximum Air Flow
RPM
Level
SCFM (LPM)
12,000
82 dB(A)
43 (1218)
12,000
82 dB(A)
43 (1218)
12,000
82 dB(A)
43 (1218)
Special Greasing Instructions
Apply 2-3
• Lubricate wick system through the angle gear oil fitting with 2-3 plunges for every 24
plunges
hours of use, to achieve maximum gear life. Prime pump to insure good oil flow.
fitting every
24 hours of
operation.
Important: Use only the recommended angle gear oil for the wick system.
Do not contaminate the wick with any other oil or grease product. Insure that all 3 plunges of
oil are injected through the fitting.
(Order 95848 Gear Oil and 95541 Gun)
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
96100 Motor Tune-Up Kit
•
Spindle
Air Pressure
Thread
PSIG (Bars)
Pound (kg)
3/8"-24 male
90 (6.2)
4.3 (1.9)
5/8-11" male
90 (6.2)
4.4 (2.0)
5/8-11" male
90 (6.2)
4.4 (2.0)
Email: [email protected]
Includes assorted parts to help
maintain and repair motor.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
95842: 1pt. (473 ml)
95843: 1gal. (3.8 L)
Wrenches
98283 - Open End (1-5/8")
95281 - Open End (19mm)
95049 - Hex Key (3/16")
Additional Repair Tools (Not shown)
96244 - Bearing Press Tool
96243 - Bearing Press Tool
96346 - Bearing Separator
96208 - Repair Collar
Weight
Length
Height
Inch (mm)
Inch (mm)
10 (255)
3-5/16 (83)
10 (255)
3-9/16 (90)
10 (255)
3-9/16 (90)
DYNABRADE
PRINTED IN USA
®