Gaggenau GI 966 760 Manuel - Sayfa 3

Bulaşık Makinesi Gaggenau GI 966 760 için çevrimiçi göz atın veya pdf Manuel indirin. Gaggenau GI 966 760 14 sayfaları.

Sayfayı Yazdır
osch
TOOLS & MATERIALS NEEDED
Tools Needed for Installation
Pipe wrench, 2 reqd.
Adjustable wrench,
(size med., 2 reqd.)
Wire stripper
Figure 1
Materials Needed
1
2
3
4
5
6
7
Additional materials may be required to comply with local codes.
Figure 2
www.gaggenau.com/us
Hammer
Hole saw or 1” hole cutter
Tape Measure
Slotted screwdriver (#2)
Phillips screwdriver (#2)
Wire Cutter
Torx screwdriver, #20
Electric Drill
Electric Connection - 2 conductor, 1 ground
insulated electrical supply cable (30" or
sufficient length for your installation).
Hot Water Supply Line - Minimum 3/8"
O.D. copper tubing or metal braided
dishwasher supply line.
Shut-off valve and fittings for hot water
supply line.
90° elbow with 3/8" N.P.T. external threads
on one end and sized to fit your water
supply line on the other end.
Teflon tape or other pipe thread compound
which help seal plumbing connections.
3 twist-on wire connectors for 16 AWG
wire.
UL listed conduit connector or strain relief.
Level
ENGLISH - 3