Great Little Trading Whittington L4981 Manuel - Sayfa 5
İç Mekan Mobilyaları Great Little Trading Whittington L4981 için çevrimiçi göz atın veya pdf Manuel indirin. Great Little Trading Whittington L4981 14 sayfaları. Desk & hutch
Sayfayı Yazdır
STEP 1:
Position the desk top on a protective surface like a rug or carpet as shown.
Attach the 2x flat runners (#9) to the inside of the desk. Ensure the runners
are positioned with the wheels at the front opening of the desk and with the
wheel on the upper edge of the runner as shown.
Use the holes shown to attach the runner to ensure the positioning is correct
and use 3x screws (#6) to attach each runner.
Ensure the screws are fully inserted to ensure the drawer runs smoothly.
#9
#6
Hardware for Step 1:
6x #6 Wood screws (14mm)
#6
#6
A
STEP 2:
Prepare the hardware to attach the legs by taking 1x bolt (#4), thread on 1x
split washer (#8) followed by 1x flat washer (#7). Prepare all remaining bolts.
Take one leg (B) and attach to the desk top using 2x of the pre-prepared bolts/
washer sets.
Please note: When screwing in the pairs of bolts, for smoother insertion do
not screw one individual bolt all the way in, but instead alternate securing each
of the bolts until they are completely secure and as tight as they can possibly
go.
Repeat with 3 remaining legs (B).
B
B
A
5
Hardware for Step 2:
8x #4 Bolts (57mm)
8x #8 Split Washers
B
8x #7 Flat Washers
#4
#7
#8
B