CEFLA i-MMs Operatör El Kitabı - Sayfa 3

Motor CEFLA i-MMs için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. CEFLA i-MMs 12 sayfaları. Micromotor

CEFLA i-MMs Operatör El Kitabı
1.

DESCRIPTION

1.1. DESCRIPTION OF THE DEVICE

Name
95520443
i-MMs
95520452
i-MMr
95520435
i-MMr L

1.2. INDICATIONS FOR USE

The CEFLA Dental Micromotors are brushless electric micromotors controlled by a control unit inside CEFLA Dental Units.
They are intended to be connected with an ISO-type handpiece attachment: straight or contra-angle of equal, gear-reducing, or gear increasing speed.
They are intended for professional use in dental surgery such as: preventive dentistry, restorative applications, endodontic treatment, prosthetic
applications and implantology practices.
Read carefully the user manual before using Micromotor.
The use of the device must respect the instructions provided.

1.3. IMPORTANT WARNINGS

For the correct interpretation of the indications in this manual the Italian text is binding.
• The device is not suitable for use with blends of inflammable anaesthetics and oxygen or nitrous oxide.
• The instrument is provided in a non-sterile state. Before use, proceed with the applicable reprocessing procedure as detailed in this manual.
• Use of electrically-powered devices may interfere with the operation of active implantable devices such as pacemakers or other active devices. In
case of doubt regarding the treatment of patients with such devices, consult a cardiology expert or another competent medical institute.
• During use of the device dust and fragments from the patient's oral cavity or from the same device may be projected into the environment (organic
and inorganic dust and metal dust, fragments of the device or its tips and potentially infected biological material).
• Protect the patient, when possible, using a dental dam.
• Instruct the patient to breathe through the nose in cases where the dam is not applicable.
• Medical personnel must put on suitable personal protection equipment.
• Suitably cool the surgical field during use.
• Use only handpieces and counterangles approved and legally marketed in your country.
• Use only burrs (or other similar tools) approved and legally marketed in your country and made with biocompatible materials complying with ISO
10993-1 and whose dimensions comply with EN ISO1797-1 standards.
• Use only lubricant approved and legally marketed in your country for dental handpieces.
• Before each use, verify the proper locking of the handpiece onto the micro-motor and of the burr onto the handpiece chuck.
• Do not use damaged or worn handpieces.
• Make sure that during operation of the motor there is full flow of cooling air. In the absence of cooling stop using the device and call authorised
technical service assistance.
• In case of visible damage, the emission of unusual noises and/or vibrations or if overheating is noticed, do not use the device and call authorised
technical service assistance.
• LED radiation: do not stare into beam or view directly with optical instruments.
The manufacturer will not be held responsible regarding safety, reliability or performance of the device if:
• The essential requirements for the location, detailed in the Dental Unit User Manual are not respected;
• The assembly, the additions, the adjustments, the calibrations and/or the repairs are not performed by authorised technical service personnel;
• If modifications, tampering, incorrect maintenance have been performed, or incompatible and/or non-original spare parts have been used on the
device;
• The device is not used in compliance with the use instructions and its intended use.
CONTRAINDICATIONS
There are no contraindications related to the use of micromotors because they are not intended to get in contact with the patient.
I-MMr • i-MMr L • i-MMs
Description
Light
MICROMOTOR
Yes
MICROMOTOR
No
MICROMOTOR
Yes
Especially suitable for
Implant & Endodontic
Prosthetic & Restorative
Prosthetic & Restorative
Supplied as
Non-Sterile and
Re-usable
Non-Sterile and
Re-usable
Non-Sterile and
Re-usable
EN
3