HI-Q TOOLS 60150700050 Kullanım Kılavuzu - Sayfa 3

Motosiklet Aksesuarları HI-Q TOOLS 60150700050 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. HI-Q TOOLS 60150700050 4 sayfaları.

HI-Q TOOLS ROCKER FRONT WHEEL STAND

Ord. Nr. 60150700050

CONTENT:

1 front wheel stand base (bottom)

1 front spar

1 front wheel retaining plate V shaped

2 bearing bolts

2 safety splints

1 rocker one piece

4 screws with dowels to ﬁ x on the ﬂ oor

2 screws incl. self-locking nuts and washers

The HI-Q TOOLS rocker front wheel stand helps to secure the motorcycle in the garage, on the lifting

platform or during transportation on e.g. a surface of a trailer. It holds the motorcycle safely in a

vertical position, after the front wheel is rolled over the rocker and stands safely in the front retaining

plate. Appropriate for all tires with a size of 13-21 inch and a tire width of 90-130 mm. Assemble the

front wheel stand base (bottom) with the front spar and the enclosed screws incl self-locking nuts und

washers. Make sure the tube of the front spar lies correctly in the supports of the base and the srews

are tightened ﬁ rmly. The ground ﬁ xing (hole) of the front spar should point to the front. Now assemble

the front wheel retaining plate incl. bearing bolt. Note: for smaller tires use the front position, for

larger tires the rear position. Then ﬁ x the rocker with the bearing bolt and the safety splint on the base.

SAFETY NOTES

1. After assembly and before use check again all the screw connections and all the safety splints for

ﬁ rm and secure hold.

2. Use the mini lifting table only on solid, plane ground (e.g. asphalt, concrete, stone). Never use loose

ground as surface .

3. Never sit on the from the HI-Q TOOLS rocker front wheel stand put motorcycle.

4. If you use the HI-Q TOOLS rocker front wheel stand on a lifting platform or a trailer/surface, it has to

be screwed ﬁ rmly in the corresponding position over the prevued holes on the rocker. In addition,

the motorcycle has to be ﬁ xed with lashing straps.

60150700050-Bedienungsanleitung.indd 5-6

This product is for universal use without speciﬁ c detailed vehicle allocation, it is important to convince

yourself before ﬁ rst use if you can use it approprately and without problems on your motorcycle. Have

a look at the informations of your vehicle operating instructions and the instructions of the vehicle

manufacturer. This is necessary because inappropriate use of this product can affect the driving security

and/ or the quality of the vehicle.

If you have any questions about the product or these instructions, please contact us before the

assembly resp. the ﬁ rst use of the product POLO technical hotline 0 21 65/84 40 500

Thus we can guarantee the correct mounting and use of the product.

State: 01/2015

21.04.15 15:20