Day6 Patriot Kullanıcı El Kitabı - Sayfa 5

Bisiklet Day6 Patriot için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Day6 Patriot 16 sayfaları.

Seat Angle and Depth

at the top of the seat post. Loosen them. (If the Horizontal

Backrest Tube is attached to the seat post, you will first need

to move it out of the way by loosening the two bolts that

attach it to the seat post.)

Seat post 1" back

from

bend

will put the bottom of the seat parallel to the ground

which is correct for most people. If not, loosen bolts

and readjust angle. Securely

finding the correct seat position and then reinstall the

Horizontal Backrest Tube.

NOTE: It is CRITICAL that the 2 seat post bolts are

tight at ALL times. Check your seat before each

ride. Failure to do this can cause serious injury.

Proper seat angle

Page 4

Newer Day 6's have two bolts

Contour Seat attaches

to mounting base with

four 1/4-20 bolts

Place seat post about 1" from the seat

pan bend (see above) and allow seat

post to tilt back as far as it will go.

Tighten the two seat post bolts

securely,

going

between them until they are tight. This

tighten the bolts after

Horizontal Backrest Tube

back

and

forth