Great Outdoors Pinnacle GP450 Montaj - Sayfa 3

ızgara Great Outdoors Pinnacle GP450 için çevrimiçi göz atın veya pdf Montaj indirin. Great Outdoors Pinnacle GP450 8 sayfaları. Pinnacle series grills

Sayfayı Yazdır

Step 4: Attach front and side shelves.

Required: (2) side shelves; (1) left and (1) right front shelf; (2) shelf inserts

(6) #10–24 x 1/2" bolts; (6) #10–24 locknuts (see below)

Hook the left and right front shelves over the

corresponding front shelf supports, push towards

the grill base. Attach to the bottom of the control

console with (1) bolt and (1) nut each (Fig. 4a).

Assemble the side shelves to the shelf supports by

positioning them half way over the supports, then

sliding them towards the base, while pushing down

firmly on the front edge. The slots at the front edge

of the shelf should align with the tabs at the back of

the shelf supports (Fig. 4b).

NOTE: On models with Side Burners, assemble the shelf with the open center

to the right-hand side of the grill. After completing this step, follow the

instructions in the Side Burner Kit.

Tap the shelf lightly to fully engage the slot and tab if necessary

(Fig 4c). Once aligned, fasten with a nut and bolt to the

underside of the supports (Fig. 4b).

(6) #10–24 x 1/2" Bolt

(6) #10–24 Locknut

Fig. 4b

Page 3

GP450/ GP600 ASSEMBLY

Slot

Tab

(View rotated 90°)

Fig. 4a

Fig. 4c