GREAT PLAINS 1205NT Teslimat Öncesi El Kitabı - Sayfa 12

Çiftlik Ekipmanları GREAT PLAINS 1205NT için çevrimiçi göz atın veya pdf Teslimat Öncesi El Kitabı indirin. GREAT PLAINS 1205NT 20 sayfaları. End wheel no-till drill
Ayrıca GREAT PLAINS 1205NT için: Saha Ayarlama Kılavuzu (5 sayfalar)

Sayfayı Yazdır

1205NT

9. Check that all safety decals and reﬂectors are

located correctly and legible. Replace if im-

properly located or damaged. Refer to "Safety

Decals" in the operator's manual.

10. Inﬂate tires to recommended pressure as list-

ed on the "Tire Inﬂation Chart," page 17.

Tighten wheel bolts as speciﬁed on "Torque

Values Chart," page 16.

Tongue Assembly

See Figure 1. With the aid of a fork-lift, overhead

hoist or loader, lift the tongue (1) into place on the

front center of tongue mounting brackets (2) and

bolt it into place with the eight 3/4 x 6 x 5 3/4 inch

u-bolts (3), lock-washers (4) and nuts (5).

Use Figure 2 as a reference for tongue location.

150-131Q

Figure 1

Tongue Installation

Figure 2

Tongue Location

14041

10111

3/24/06