Dynabrade 52639 Güvenlik, Çalıştırma ve Bakım Talimatları - Sayfa 8
Öğütücü Dynabrade 52639 için çevrimiçi göz atın veya pdf Güvenlik, Çalıştırma ve Bakım Talimatları indirin. Dynabrade 52639 8 sayfaları. Right angle grinders
Sayfayı YazdırBuy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
53630 Backup Flange
•
Mount high profile flap disc wheels
with 22.23 mm center hole.
Additional Repair Tools (Not shown)
96244 - Bearing Press Tool
96243 - Bearing Press Tool
96346 - Bearing Separator
96208 - Repair Collar
95842 - Dynabrade Air Lube
95848 - Dynabrade Gear Oil
95541 - Dynabrade Grease Gun
Model
Motor
Number
hp (W)
52638
1.3 (969)
52639
1.3 (969)
Additional Specifications: Air Inlet Thread 3/8" NPT • Hose I.D. 3/8" (10mm)
Sound Level is the pressure measurement according to the method outlined in ISO regulation ISO-15744
Dia. Whl.
Thru Hole Size
115 mm
127 mm
Expect a gear life
of 500 hours
into lubrication
minimum, with
fitting every
proper lubrication.
24 hours of
Reference Contact Information
1. American National Standards Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2008
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Optional Accessories
Machine Specifications
Motor
Sound
Maximum Air Flow
RPM
Level
SCFM (LPM)
12,000
82 dB(A)
43 (1218)
12,000
82 dB(A)
43 (1218)
Wheel Selection Chart
Min. RPM Rating
22.23 mm
12,000
22.23 mm
12,000
Special Greasing Instructions
Apply 2-3
• Lubricate wick system through the angle gear oil fitting with 2-3 plunges for every 24
plunges
hours of use, to achieve maximum gear life. Prime pump to insure good oil flow.
operation.
Important: Use only the recommended angle gear oil for the wick system.
Do not contaminate the wick with any other oil or grease product. Insure that all 3 plunges of
oil are injected through the fitting.
(Order 95848 Gear Oil and 95541 Gun)
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
96100 Motor Tune-Up Kit
•
Includes assorted parts to help
maintain and repair motor.
Wrenches
98283 - Open End (1-5/8")
95281 - Open End (19mm)
97782 - Pin Wrench
94925 - Pin Wrench - Outer Flange Nut
95049 - Hex Key (3/16")
Spindle
Air Pressure
Weight
Thread
PSIG (Bars)
Pound (kg)
M14 x 2 male
90 (6.2)
5.1 (2.3)
M14 x 2 male
90 (6.2)
5.4 (2.5)
Spindle Thread
M14 x 2
M14 x 2
Email: [email protected]
Length
Height
Inch (mm)
Inch (mm)
10 (255)
3-6/8 (96)
10 (255)
3-6/8 (96)
Whl. Thickness
3 mm - 7 mm
3 mm - 7 mm
®
DYNABRADE
PRINTED IN USA