Gaggenau VP230120 Kullanıcı Kılavuzu - Sayfa 10
Hob Gaggenau VP230120 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gaggenau VP230120 16 sayfaları.
en Installation instructions
Installation instructions
13 Installation instructions
Observe this information when installing the appliance.
13.1 Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
13.2 Appliance dimensions
You will find the dimensions of the appliance here
13.3 General information
¡ Read this instruction manual carefully.
¡ Only a licensed expert may connect the ap-
pliance.
¡ Switch off the power supply before carrying
out any work.
¡ Never use this appliance in boats or in
vehicles.
¡ Follow the worktop manufacturer's recom-
mendations.
10
13.4 Instructions for the electrical
connection
In order to safely connect the appliance electrically, ob-
serve this information.
¡ Check the household wiring before connecting the
appliance. Ensure that there is sufficient fuse protec-
tion for the household wiring. The voltage and fre-
quency of the appliance must match the electrical
installation (see rating plate).
¡ Ensure that the power supply is properly earthed,
that the fuse protection is sufficient and the cable
and wiring system in the building is sufficiently di-
mensioned for the electrical power of the appliance.
¡ Route the connection cable in such a way that it
does not touch the hot casing.
¡ Use only the connection cable that is supplied with
the appliance or is provided by technical customer
service.
¡ This appliance complies with the EC interference
suppression regulations.
¡ The appliance corresponds to protection class 1.
You should therefore only use the appliance with a
protective earth connection.
¡ Ensure that the protection against contact is guaran-
teed during installation.
¡ Only a qualified electrician may connect appliances
without a plug. They are subject to the requirements
of the local electricity provider. We recommend in-
stalling a residual-current-operated circuit-breaker
(RCCB) in the appliance's power supply circuit.
¡ Carry out the electrical connection in accordance
with the installation instructions. The appliance may
be damaged if it is not connected correctly.
¡ The manufacturer shall assume no liability for mal-
functions or damage resulting from incorrect elec-
trical wiring.
¡ We recommend installing a socket equipped with
protective-earth contacts behind the appliance, ap-
proximately 70 cm above the floor, in accordance
with regulations. Only a qualified electrician may in-
stall a protective contact socket in accordance with
the relevant regulations.
13.5 Safe installation
Follow these safety instructions when installing the ap-
pliance.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord or the appliance power cable of
▶
this appliance is damaged, it must be replaced with
a special power cord or special appliance power
cable, which is available from the manufacturer or
its Customer Service.