Hi-Tech 0803 Kullanıcı Kılavuzu - Sayfa 5

Blender Hi-Tech 0803 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Hi-Tech 0803 12 sayfaları. Turbo blender

Sayfayı Yazdır

The mark "

" represents the matters possibly causing slight injuries or property loss.

This product is equipped with built-in overheating protector. When it is used abnormally or its

motor runs at a serious overload, this product will automatically stop for protection. If this product

cannot be started after it is protected for 30 minutes, it is necessary to send this product to a

maintenance outlet of this company for maintenance and it is not allowed to dismantle this

product arbitrarily.

After using this product, it is necessary to clean all the positions touching food in order to

prevent this product from sending forth peculiar smell after being not used for a long time.

If this product gets stuck during its use, please immediately turn off it, pull out the power plug,

remove the container, take out the material(s) leading this product to getting stuck and then

continue using it after the motor is cooled.

After using this product, you are required to timely pull out the power plug and clean this product.

Before using this product, you are required to ensure that the worktable is clean and greasy dirt

is eliminated timely.

Please keep the optimal distance of more than 30 cm between this product and any other kitchen

appliance.

Specification

Voltage

220-240V~

a. This appliance shall not be used by children. Keep the appliance and its cord out of reach of

children.

b. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or instruction concerning use of

the appliance in a safe way and if they understand the hazards involved.

c. Children shall not play with the appliance.

d. Appliances shall warn of potential injury from misuse.

e. Always disconnect the appliance from the supply if it is left unattended and before assembling,

disassembling or cleaning.

f. The appliance shall state that care shall be taken when handling the sharp cutting blades,

emptying the bowl and during cleaning

g. Be careful if hot liquid is poured into blender as it can be ejected out of the appliance due to a

sudden steaming.

h. Switch off the appliance and disconnect from supply before changing accessories or

approaching parts that move in use.

i. The appliance must not be immersed.

j. The heating element surface is subject to residual heat after use.

k. When using the appliance, avoid spillage of water on the connector as this may cause damage

to the appliance.

l. Do not misuses use this appliance, it must be occur damage.

m.CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this

appliance must not be supplied through an external switching device, such as a timer, or connected

to a circuit that is regularly switched on and off by theutility

Frequency

Moter Power

50/60Hz

1500W

Cup capacity

Heater power

1.75 Liters

800W