73RC 73TEN Montaj Kılavuzu - Sayfa 2

Motorlu Oyuncak Araba 73RC 73TEN için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 73RC 73TEN 6 sayfaları. 1/10th scale competition on-road chassis kit

BAG 1
Step 1
Standoff 18mm
x4
Standoff 25mm
x2
Ball Nut
x2
FH Screw 3x5mm
x2
FH Screw 3x6mm
x6
* Ensure you fix the ball nuts with the shorter 3x5mm Screws. We also suggest a small amount of Loctite
be applied to ensure the balls do not loosen.
Step 2
Ball Nut
x1
CH Screw 2x6mm
x2
* Take care not to overtighten the two screws - ensure the pivot ball can move freely.
Step 3
FH Screw 3x10mm
x2
Lock Nut 3mm
x2
* At this stage of assembly do not fully tighten the screws holding the pivot block onto the chassis.
Copyright 2018 73RC
2
73TEN 235mm Chassis