Gaggenau RC 462*AU Kullanım Kılavuzu - Sayfa 10

Buzdolabı Gaggenau RC 462*AU için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Gaggenau RC 462*AU 18 sayfaları.

Sayfayı Yazdır
Holiday mode
If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
holiday mode.
When Vacation mode is switched on, the following
settings are made:
▯
The appliance works in energy saving mode
▯
The illumination is switched off
▯
Fast cooling or fast freezing is then ended (if
activated)
Switching on
Press Holiday button ¶.
VACATION is displayed in the display panel.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
Rest mode
When Rest mode is switched on, the following
settings are switched off:
▯
Acoustic signal
▯
Interior light
▯
Messages on the display panel
▯
The background illumination of the display panel
is reduced
▯
Buttons are locked
Switching on
Press the fast cooling button ´ and keep it held
1.
down.
Press Holiday button ¶.
2.
Hold the fast cooling button ´ down for
3.
3 seconds longer.
The symbol VACATION flashes on the display
panel and RESTMODE is displayed.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
10
Energy saving mode
If the energy saving function (eco function) is
activated, the appliance switches to energy saving
operation. This energy saving function is preset at
the factory in order to reduce energy consumption.
The background illumination of the fascia is likewise
reduced.
Switching on
Press setup button μ.
1.
Press the selection button ¿, until ECO MODE
2.
and the current setting (OFF) is displayed.
Press the setting button @, in order to reset
3.
the setting.
Press the setup button μ, in order to store
4.
the setting.
ECO is displayed in the fascia.
Switching off
Press setup button μ.
1.
Press the selection button ¿, until ECO MODE
2.
and the current setting (ON) is displayed.
Press the setting button A, in order to reset
3.
the setting.
Press the setup button μ, in order to store
4.
the setting.

Alarm function

Switching off the warning signal
Press the alarm button ± to switch off the warning
signal.
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.

Usable capacity

Information on the usable capacity can be found
inside your appliance on the rating plate (see diagram
at chapter "Customer service").