GREAT PLAINS Nutri-Pro NP30L Kurulum Talimatları Kılavuzu - Sayfa 4

Çiftlik Ekipmanları GREAT PLAINS Nutri-Pro NP30L için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. GREAT PLAINS Nutri-Pro NP30L 10 sayfaları. Tire scraper

Sayfayı Yazdır
Nutri-Pro Tire Scraper
Fire Hazard:
Welding can create sparks. Perform the work away from
flammable materials. Wear suitable protective equipment.
Allow hot parts to cool before continuing work.
Tack weld along the top of the mount plate to hold it
in position.
Remove the locator mount.
1
Weld (
/
inch fillet weld, about 1
4
places on the top of the mount plate and two places
on the bottom.
Clean off any slag and weld splatter. Allow the welds
to cool. Paint green.
4
1
/
inch long) at two
2
68236A
If the tire scraper (12) is not installed to the tire
scraper mount (24), install the tire scraper (12) to the
shank mount (15) with two
bolts (11) and nuts (20).
Install the scraper pivot (17) to the shank mount
1
plate (15) using two
/
-13 x 1
2
1
/
inch washer locks (14), and two nuts (13).
2
Install the tire scraper (12) to the scraper pivot (17)
1
with four 1
/
inch clamps (19) and lock nuts (16).
2
Install the tire scraper mount (15) to the mount plate
1
1
using two
/
-13 x 1
/
2
4
(18), and nuts (17).
Install the tire scraper mount (24) into the mount
1
plate using two
/
-13 X 1
2
locks (22), and nuts (21).
27
24
12
20
11
Adjust the tire scraper as needed.
Repeat the procedure for the other gauge wheel.
7
3
/
-14 X 1
/
inch plow
16
4
1
/
inch bolts (18), two
2
inch bolts (16), lock washers
1
/
inch bolts (27), washer
4
21
22
19
18
15
17
14
13
68238d
Great Plains | 427-051M
16