Agrilight AGRIBOX pro Hızlı Tanıtım Kılavuzu - Sayfa 11

Anahtar Agrilight AGRIBOX pro için çevrimiçi göz atın veya pdf Hızlı Tanıtım Kılavuzu indirin. Agrilight AGRIBOX pro 20 sayfaları.

Calibrate light sensor

The light level is controlled with a light sensor which must be placed on the north side of the

barn. The light outside of the barn could influence the light level inside the barn. Therefore a

calibration has to be made. For all settings, read the complete manual of the AGRIBOX pro.

Daylight compensation

If you have connected a light sensor, we advise to set Daylight Compensation to ON. When

setting Daylight Compensation to ON, the system will use the light sensor value to decide

when to turn on the lights (dimmed or full). During dusk, dawn or very dark cloudy days the

light level inside the barn is "lifted up" (by dimmed light) till the advised level. You can link

daylight compensation to a group by means of a program.

This option can be found under Settings. This has to be activated separately for

each group.

Set the light sensor dip switches in the 20 kLux position before calibration:

Dipswitch 3 ON, Dipswitches 1,2 and 4 OFF. Set the light sensor dip switches in the 2 kLux

position after calibration: Dipswitch 2 ON, Dipswitches 1,3 and 4 OFF.

Screen compensation

If the building is fitted with screens, you can set screen compensation for each group.

This option can be found under Settings. This has to be activated separately for

each group.

Step 4

Using the AGRIBOX pro

Once you have set the AGRIBOX pro, you can change settings at any time. You can modify

programs. You can add or remove fixtures, etc. It is also possible to operate the groups

manually.