DYNABREEZE FA-23105 Talimatlar ve Kullanım Kılavuzu - Sayfa 7
Fan DYNABREEZE FA-23105 için çevrimiçi göz atın veya pdf Talimatlar ve Kullanım Kılavuzu indirin. DYNABREEZE FA-23105 12 sayfaları. Industrial 750mm pedestal fan
Ayrıca DYNABREEZE FA-23105 için: Kullanım Kılavuzu & Garanti (12 sayfalar)
Sayfayı Yazdır
Assembling the fan cont.
Blade & Grilles
1. Use the shifter to unscrew the 4 rear
grille locking screws, spring washers and
washers from the motor head.
2. Assemble the rear grille onto the motor
head, aligning the holes and re-insert the
rear grille screws, washers and spring
washers.
Tighten the screws to avoid vibration
NOTE:
noise and ensure the grille locking screw
and nut are situated at the top of the rear
grille.
3. Remove the plastic cover from the motor
shaft to insert the fan blade. Align the
blade screw on the fan blade, to the flat
area on the motor shaft. Tighten the blade
screw.
4. Remove the grille locking screw and nut -
put aside safely as these are small.
5. Place the front grille over the rear grille,
aligning the two small holes and secure the
position by clipping the hook over the rear
grill. Re-insert the grille locking screw into
the holes and tighten with the nut.
6. Close the side hook fastenings around the
grilles.
The fan assembly is now complete.
INSTRUCTION USER MANUAL & WARRANTY 7