Daymak Beast 2.0 Standard Kullanıcı Kılavuzu - Sayfa 6

Scooter Daymak Beast 2.0 Standard için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Daymak Beast 2.0 Standard 20 sayfaları.

Driving the Beast

Engaging the motor

On the right handlebar is a throttle that must be rotated towards you (bring the back of

your hand towards your body) The throttle is very sensitive so be sure to turn it slowly.

Make sure that you are either on the unit and can easily turn on the brakes (see below), or

the unit is on a center kickstand. (See the center kickstand section)

Braking

The Beast 2 has a front and rear hydraulic disc braking system that allows you to stop

quickly. On either side you will nd brake handles like this. On the beast the left brake

handle controls the rear brakes and the right handle controls the front brakes.

You can also adjust the brake handles so

that they are closer or further from your

hand by moving the needle pointing to

1 up to 5 positions.

*PLEASE NOTE* Always use the rear

braking rst before applying the

front brake to avoid injury.