7inova 7W310 Hızlı Kurulum Kılavuzu
Tekrarlayıcı 7inova 7W310 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. 7inova 7W310 2 sayfaları. Wireless-n wifi repeater 300mbps
Sayfayı Yazdır
QUICK
INSTALLATION
GUIDE
Wireless-N WiFi Repeater 300Mbps
Model: 7W211
Functions Introduction
A P
Internet
ADSL Router
Wireless Device
REPEATER
Internet
ADSL Router
Wireless Device
CLIENT
Internet
ADSL Router
Wired Device
Before you start to use this device, please check if there's anything
missing in the package, and contact your dealer of purchase to claim for
missing items:
PACKAGE CONTENTS:
WiFi Repeater
Cautions:
1. Disconnect the device in thunderstorms in case of lightning damage.
2. Keep far from heat source and ensure ventilation.
3. Keep waterproof in the storage, transportation and operating environment.
Wireless Access Point
(AP: convert wired network to wireless network)
This Device can be used as a wireless AP, make your wired
network WiFi ready, your wireless devices can go internet
wirelessly via our repeater.
Wireless Repeater
(Repeater: extend your existing wireless signal)
This Device connects to existing wireless network, and extends
wireless cover range.
Tips:
Your root-wireless device can be scanned by this device,
and its signal strength should be no less than "
"
Client
(Client: convert wireless network to wired network)
Wired network devices (such as game console/computer), use
network cable connect the device through the CLIENT mode,
connect 2.4GHz wireless signal for Internet access.
Quick
Installation
Guide
QIG
Ethernet Cable
WPS One Button Setup
1
Plug this device into socket, Power light
2
Press WPS button of root-wireless device for 2seconds,
launch WPS function. (Please refer to your rooted wireless
device's user manual for its WPS button usage)
WPS
4
The device's WPS LED
should be constant on, then means WPS connect successfully.
ATTENTION: Above is only workable provided both of root-wireless device and this device have normally working WPS button. If
has no WPS button, please refer to "WiFi Repeater Web browser setup wizard".
LED indicators' Status Description
Ethernet
Reset Button
WPS Button
Indicator
Name
Status
Power Status Indicator
Green On
Green slow blink
Wireless Status Indicator
Green fast blink
Green fast blink
WPS Status Indicator
Off
Constant On (Off after 5mins)
Green On
Ethernet Status Indicator
Green fast blink
should be constant on. WiFi LED
always blinks, means the device starts to work.
3
In 2 minutes, press the WPS button of this device for 2seconds,
launch its WPS function. When WPS LED
WPS is connecting.
Power LED
WLAN LED
WPS LED
Ethernet LED
Description
Get Powered
Wireless Function Launched
Data Transmission via wireless
WPS Function Launched
Not use or have completed the connection
WPS pairs successfully
Ethernet Connected
Data Transmission via Ethernet
blinks, means
(This WPS LED will turn off after 5 minutes)