DynaColor DynaGuard 200 Hızlı Kurulum Kılavuzu - Sayfa 2

DVR DynaColor DynaGuard 200 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. DynaColor DynaGuard 200 8 sayfaları.

Sayfayı Yazdır
Connector
Main Monitor (S-Video /
BNC / VGA)
Call Monitor (BNC)
Video Input
Camera Looping
LAN Connector (RJ-45)
Power Jack
Power Switch
Audio In / Out
Alarm I/O & RS485
RS-232C
USB Connector
IEEE 1394 FireWire ®
PAL/NTSC Switch
Alarm I/O & RS485 Pin Definition:
Pin
Definition
1
Normal Open 1
2
Common Node 1
Normal Close 1
3
Ground
4
Alarm In 4
5
6
Alarm In 3
7
Alarm In 2
All rights reserved
Description
S-Video, BNC and VGA output connectors are offered for connecting to a
main monitor.
The call monitor is used to display full screen video of all installed
cameras in sequence. The BNC Call Monitor connector allows user to
connect the DynaGuard
4 or 8 BNC connectors are offered for video input streams from installed
cameras. The number of connectors is equal to the number of channels.
Plenty of BNC connectors are positioned on the real panel for looping out
the video input. The number of these connectors is equal to the number of
channels.
TM
The DynaGuard
200 series DVR is capable of networking. The LAN
port opens the door of DVR to Ethernet where by the Internet.
TM
The DynaGuard
200 series DVR has a AC power connection jack.
Please connect the power supply that ships with the unit.
NOTE: Use of other power supply may cause overloading.
Used to power up and shut down the unit.
Audio In RCA connector is offered for connecting an audio source device
to the unit; Audio Out RCA connector is offered for connecting an audio
output device to the unit.
The unit provides an alarm I/O and RS485 port that offers user the
flexibility required to connect the unit to other devices.
The unit provides a RS-232C communication port for sending and
receiving signals.
Two USB 2.0 ports on the rear panel for users to connect external USB
devices to the unit.
TM
The DynaGuard
200 series DVR is equipped with two IEEE 1394 ports
for extended connections.
The video standard switch is for qualified service personnel only.
Pin
Definition
8
Alarm In 1
9
RS485 D-
RS485 D+
10
Normal Open 2
11
Common Node 2
12
13
Normal Close 2
14
Ground
2
TM
200 series DVR with an optional call monitor.
Pin
15
16
17
18
19
20
Definition
Alarm In 8
Alarm In 7
Alarm In 6
Alarm In 5
RS485 D-
RS485 D+
www.dynacolor.com.tw