DynaColor EDNS V3000 Kurulum Kılavuzu - Sayfa 2

DVR DynaColor EDNS V3000 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DynaColor EDNS V3000 14 sayfaları.

Sayfayı Yazdır
15
Power Key
16
PTZ
17
Copy
18
Spot
19
Enter
20
Direction Keys

Rear Panel

e-SATA
1
(for Export)
Main Monitor-
2
BNC
Main Monitor
3
Audio Out
Call Monitor
4
(BNC)
Call Monitor
5
Audio Out
Video In (BNC)
6
Vidoe Out (BNC)
7
Power Jack
8
(Plus Model)
e-SATA
9
(for Record)*
Audio In
10
LAN 10/100/1000M
11
(RJ-45)
USB Port
12
2
Press and hold this key to trigger the quick shutdown function.
Press this key to enter Dome Camera Control mode.
This key is used for marking time in quick video export function.
Press this key to enter Call Monitor Control mode.
1. In OSD menu or selection interface, press these key to make the
selection or save settings.
2. In live full-screen viewing mode, press this key to view a 2× zoom
image; press it again to return.
1. In Zoom mode, these keys function as normal direction keys.
2. In the OSD setup menu, the direction keys are used to move the
cursor to previous or next fields. To change the value in the selected
field, press UP / DOWN keys.
Users can connect an e-SATA storage device via this port to export
recorded videos in the DVR.
The DVR can connect to a monitor via a BNC connector.
A RCA connector is provided to output audio associated with the main
monitor.
The call monitor is used to display full screen video of all installed
cameras in sequence. The BNC Call Monitor connector allows users
to connect the DVR with an optional call monitor.
A RCA connector is provided to output audio associated with the call
monitor.
A group of BNC connectors is provided for video input streams from
installed cameras.
The same amount of BNC connectors underneath Video In (BNC) are
offeded for looping out the video input.
Connect the power cord shipped with the unit. Use of other power
supply cords may cause overloading.
Users can connect an e-SATA storage device via this port to expend
HDD capacity of the DVR.
A terminal block Audio connector is provided for the DVR to connect
audio source devices.
The DVR is capable of networking. Once the unit is connected to the
LAN network, users can remotely access the DVR through the remote
software on a PC.
This USB port allows users to connect a USB mouse with PS/2
protocol.