HiB Connect Series Manuel - Sayfa 2
İç Mekan Mobilyaları HiB Connect Series için çevrimiçi göz atın veya pdf Manuel indirin. HiB Connect Series 2 sayfaları.
Sayfayı Yazdır
Operating Instructions
The heated Pad is only on when the Mirror is illuminated.
This mirror is fitted with colour temperature changing technology.
To switch on/off
Slowly move your hand past the sensor. (Fig. C)
To change the colour temperature
1.
To alter the colour temperature of the mirror, hold your hand underneath the sensor (Fig. D), the colour temperature will start to change.
2.
Simply move your hand away from the sensor when the desired colour temperature has been reached and continue to operate the mirror as
normal - the chosen colour temperature will remain even after power is switched off and on again.
Turn mirror on (Fig. C)
Pairing Device To the Mirror
• To activate the Bluetooth
, turn on mirror by the IR sensor located on the bottom right of the mirror (see Fig. C). The mirror will give out a tone to confirm it is ready for pairing.
TM
• Activate the Bluetooth
on your device* (see Fig. E). Refer to the device's instructions for details.
TM
•
Search for "HiB001". If prompted for a connection code, use "0000".
• You can now play music or other media through the Bluetooth
• When the mirror is turned off the connection to the Bluetooth
is still within range.
• Refer to your device manual for operating controls.
• Music will stop playing when a phone call comes into the Bluetooth
*Only compatible Smart Phones & Bluetooth
Activate Bluetooth
(Fig. E)
TM
WEEE compliance
Must not be mixed with general
household waste
T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
The mirror will give out a tone to confirm successful connection.
mirror (see Fig. F).
TM
will be lost. When the mirror is turned on again it will automatically reconnect to the last connected device if it
TM
device, and will automatically reconnect when finished.
TM
TM
Devices.
Play content from device (Fig. F)
E:
To change colour temperature (Fig. D)
Trouble Shooting Guide
Symptoms
Device not
paired
Device not
connecting
No volume
No
connection
hib.co.uk
Possible
Problem
Solution
Check Bluetooth
is
TM
Bluetooth
not
TM
activated on compatible
activated
device & mirror turned on
Only one
device can be
Disconnect all devices and
connected to the
reconnect only one device
mirror at any one
time
Volume is
controlled from
Increase volume on device
device
Range is within 8 metres,
Out of range
move device closer to
mirror