HiB Essence 50 Manuel - Sayfa 2

İç Mekan Mobilyaları HiB Essence 50 için çevrimiçi göz atın veya pdf Manuel indirin. HiB Essence 50 4 sayfaları.

Please Note

This product can only be recessed fitted into a wall. Before installing ensure you take note of

measurements of the recessed area and the side fixing points inside the cabinet carcass (See Fig. B & E).

You may need to remove the door(s) to make it easier to fit. This can be done by removing the hinges (See

Fig.A). DO NOT FIT SHELVES AT THIS STAGE.

Fixing Preparation

Before installation, ensure the construction of the partition wall is suitable to accommodate the size

and weight of a recessed cabinet.

Ensure there are no hidden pipes or cables in the wall you are drilling or cutting into.

Measure the dimension of the cabinet carcass (but not the front aluminium fascia).

Using these dimensions, take a soft pencil and mark the outline for the required aperture in the

wall. Take great care to mark this accurately, straight and level.

Using an appropriate tool, cut out the aperture in the wall where the cabinet will fit (See Fig. B).

If it is necessary, install supporting baton(s) or noggin(s) around the recessed area (See Fig. C) to

which the cabinet can be secured. These supports must be completely vertical and parallel to the

cabinet to prevent the cabinet twisting when fitted.

Manoeuvre the cabinet into the wall aperture (See Fig. D).

Using a suitable screwdriver or drill, secure the cabinet into the wall aperture, via two holes with

the supplied screws (two on each side) (See Fig. E).

Adjust the shelf support brackets to your desired height ensuring the matching brackets are

level. This is done by slightly loosening the screw, do not remove the screw completely. Once

in position tighten screw to secure the bracket and put the glass shelf into shelf support bracket

(See Fig.F).

If the door(s) were removed at the beginning of this process, carefully reattach the door(s) (See

Fig.A).

Care Instructions

Do not use abrasives or solvents when cleaning this product.

Wipe off all water spillages as soon as possible using a soft, damp cloth.

Aftercare Service

In the unlikely event that this product should fail please contact HiB customer services, contact details

shown on the back page.

(Fig. A)