HiB Novum NF01SOS20 Series Montaj Talimatları Kılavuzu - Sayfa 11

İç Mekan Mobilyaları HiB Novum NF01SOS20 Series için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. HiB Novum NF01SOS20 Series 16 sayfaları.

Sayfayı Yazdır
Door Installation and Adjustment
1.
Release the hinge plate from hinges, see Fig. 12.
2. Push the hinge plate into the pre-drilled holes provided and secure into place
using the screws provided. HiB advises against using an impact driver. When
installing a single door unit, take note of the left hand / right hand orientation
prior to installation.
3. Reattach the hinges to the hinge plates.
4. Adjust the hinges as required, see Fig. 13.
Top Panel Installation
1.
Align the clips on the top panel with the clips on the carcass.
2.
Push the top panel into the clips to secure, see Fig. 14.
BTW Front Panel Installation
1.
The BTW front panel is designed to suit a 15cm plinth height.
2. Secure the front panel to the carcass by aligning the clip fixings and slot into
place, see Fig. 15.
hib.co.uk
11