ActiveAid 202 Kullanıcı El Kitabı - Sayfa 11

Tekerlekli Sandalye ActiveAid 202 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ActiveAid 202 12 sayfaları.

Maintenance

• It is necessary to inspect your Shower/Commode chair at least weekly to ensure it is in safe operating condition.

• Check all fasteners (snap buttons, screws, nuts, bolts, clips, pull pins, handles, etc.) to ensure they are present

and secure.

• Check upholstery for tears and cracks.

• Check belts for fraying, cuts, tears, broken/worn stitching and buckles for cracks or damage.

• Check suction cups and crutch tips for flat spots, cracks, and wear.

• Replace damaged or worn components. Contact your Supplier for repair/replacement of said parts before

continuing use of the shower/commode chair.

• Use only recommended ActiveAid replacement parts; use of any other parts may void your warranty and cause

damage to your device.

Cleaning/Disinfecting

• After each shower use, rinse the device with water to remove soap residue. Using a soft non-abrasive cloth or

sponge, wipe the device down to remove water accumulation and product build up. Allow to dry completely

before storing.

• When cleaning the unit, use a mild detergent with a soft non-abrasive cloth or sponge. Do not use harsh

cleaning solvents or an abrasive cleaning agent.

• Upholstery pads may be cleaned with a non-abrasive, non-alcohol-based soap or sanitized using a bleach

dilution of up to 1:10. Note, many anti-bacterial and disinfectant products contain alcohol and should not be

used on the upholstery, due to the drying effect of the alcohol. Choose a non-alcohol-based sanitizer.

Germicidal wipes that are rated to kill C-difficile spores may be used on the upholstery and the epoxy coated

stainless steel.

• Urethane Coated Fabrics may be cleaned with a sponge or damp cloth to wipe the surface clean with warm

water. As needed, they may be hand washed using warm water and a mild detergent. Do not use bleach. Line

dry. Do not iron. Do not dry clean.

Parts Replacement

When asking your supplier to order replacement parts, please specify the serial number of the 202 unit.

Your Supplier will contact ActiveAid Customer Service to obtain the necessary items for your specific unit.

If you have any questions, please contact your local supplier or call ActiveAid, LLC