GREAT PLANES F4U Corsair Kullanım Kılavuzu - Sayfa 8

Oyuncak GREAT PLANES F4U Corsair için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. GREAT PLANES F4U Corsair 16 sayfaları. Arf plane

❏ ❏

7. Locate one 14" [356mm] bent aileron pushrod wire.

Slide the wire into the pushrod guide tube located near the

control horn as shown.

❏ ❏

8. Insert the bent end of the pushrod into the middle

hole on the control horn. Attach a black nylon control horn

keeper to the pushrod as shown. Secure the snap keeper

to the pushrod with a drop of thin foam safe CA.

❏

9. Repeat steps 4 through 8 for the other side of the wing.

❏

10. Locate one of the pushrod quick connectors. Remove

the servo arm and attach the quick connector as shown. Use

a sharp hobby knife to enlarge the hole in the arm to allow the

connector to rotate freely. Add a drop of Threadlocker to the

bottom screw to prevent it from backing out.

❏

11. Slide both aileron pushrods through the hole in the

quick connect as shown and reattach the servo arm.

❏

12. Center both ailerons and then tighten the set screw on

the quick connector to secure the aileron pushrods.