GREAT PLANES Fling DL ARF Kullanım Kılavuzu - Sayfa 9

Oyuncak GREAT PLANES Fling DL ARF için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. GREAT PLANES Fling DL ARF 16 sayfaları.

❏

7. Cut an 8" [200mm] piece of pushrod string. Loop it

through the forward hole and around the carbon fuse and

the elevator turnaround twice. Pull elevator turnaround to

the fuse with the string and secure with thin CA.

❏

8. Pull the remaining string through the rear hole and loop it

around the fuse and elevator turnaround as many times as

possible. Pull the string tight and secure it with thin CA.

❏❏

9. Glue the stab to the fuse, making sure it is aligned

with the wing and that the TE of the elevator is 1/8" [3mm]

in front of the fin.

Install the Rudder & Elevator Servos

❏

1. Trim the covering and slide the two sided plywood

control horn through the rudder, center it and then glue it

with thin CA.

❏

2. Slide the single sided plywood control horn into the

elevator and glue with thin CA.

❏

3. Install the aileron extensions under the servo tray.

A. If you will be utilizing flaperon mixing install two

12" [300mm] servo leads.

B. If you will be using the ailerons just as ailerons

install a Y-harness.