Dynacord Madras M 212 Kullanıcı El Kitabı - Sayfa 5
Amplifikatör Dynacord Madras M 212 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dynacord Madras M 212 16 sayfaları. Powered system 2 x12"/2" 600 watts amplifier output power high efficiency power tracking supply
Sayfayı Yazdır
INPUT
Electronically balanced input for the connection of high-level
signal sources like mixing consoles or signal processors.
Connections can be established using phone or alternatively
XLR-type connectors.
Caution: Preventing the occurrence of spurious noise.
Prior to connecting/disconnecting the input, set the
level control to its counterclockwise stop.
OUTPUT
This connector is connected in parallel to the input allowing
the through connection of the input audio signal.
LEVEL
dB-scaled level control for adjusting the power amp's overall
amplification. To prevent distortion and clipping of pre-linked
mixing consoles, the control should generally be set to a
value between 0dB and +6dB.
MODE
This switch allows selecting the operation mode of the
M212. The cabinet's internal active frequency crossover is
automatically deactivated when set to FULLRANGE. The
loudspeaker system transmits the entire frequency range.
Setting the switch to the position MID-HIGH activates an
active frequency crossover with 124Hz crossover frequency,
so that only the audio signal's mid-high range is transmitted.
When using a M212 in combination with a M18 subwoofer,
selecting MID-HIGH is generally recommended, to ensure
linear frequency response of the M212/M18 combination.
Using the cabinet in MID-High mode in monitoring applications
may be favorable for attenuating the reproduction of low
frequency signals.
5