Automate 4606A Kullanıcı El Kitabı - Sayfa 10

Araba Alarmı Automate 4606A için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Automate 4606A 19 sayfaları.

Remote Start Diagnostics

For user safety, the system must be properly configured or remote start

will not activate. A Remote Start Fault may be caused by any of sev-

eral configuration issues. If the remote start fails to activate, refer to the

table below for the command type and parking light flashes that will

identify the configuration issue and solution.

Light Flash

Problem

5 flashes

Brake is on

6 flashes

Hood is open

7 flashes

MTS mode not enabled

8 flashes

Neutral safety is disconnected Set the parking brake or move

9 flashes

Garage Mode is ON

The Responder LE and 1-way companion remote controls have opera-

tions that can be configured to a user's personal preferences*.

* See this section in online guide.

Solution

Release the foot brake

Close the hood

Enable MTS mode

the shifter to the park position

Turn Garage Mode OFF