Automate AM11 Kullanıcı El Kitabı - Sayfa 4

Otomobil Elektroniği Automate AM11 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Automate AM11 4 sayfaları. Data cruise control kit with cr3w data cruise control kit with cr3w

Sayfayı Yazdır
GENERAL CRUISE CONTROL FUNCTIONS
Activate Cruise Control
The
<<On / Off>>
button is used to enable the cruise control, it should be
the cruise control and should be turned
is performed by sliding the
<<On / Off>>
OFF
Set / Coast Button
Programing Vehicle Speed
To program and memorize vehicle speed in cruise control, verify that the control arm and
"cruise main"orange indicator is ON, drive vehicle to a speed of at least
desired speed is reached press and release the
the accelerator pedal you should now be cruising at the desired speed.The "Cruise Main"
indicator should become green.
Setting Vehicle To A Slower Speed
Press and release the
"Set / Coast"
button, every time the button is pressed and released
you will decelerate approx 2 km/h, if the button is pressed and held vehicle will decelerate
until button is released.
Setting Vehicle To A Higher Speed
Press accelerator pedal to achieve the desired speed, then press and release the
<<Set/Coast>>
button, the vehicle will be set to the desired speed.
The "Resume / Accel" Button
In order to resume to pre-set vehicle speed after cruise control was deactivate by brake
peda, turn the
"Resume / Accel"
decelerate to the previous set speed.
Note: The resume function will only be available after the vehicle was previously
set to a desired speed.
Accelerating While In Cruise Mode
To accelerate to a new cruising speed, briefly turn the
should accelerate approx 2 km/h every time handle is turned. To set to a new cruising
speed you can also turn and hold the "
cruising speed is reached.
4
G8501A
2008-02
ON
OFF
when not needed. Turning cruise control
switch to the ON position.
ON
50 km/h
<<Set / Coast>>
button, slowly release
button, the vehicle will then either accelerate or
"Resume / Accel"
handle. Vehicle
Resume / Accel"
button until the new desired
MAZDA CRUISE CONTROL FUNCTIONS
Activate Cruise Control
The
<<On / Off>>
to operate
operate the cruise control and should be turned
ON
control arm
ON
To activate the Mazda cruise control, press Set/Coast and turn Resume/Accel at
same time for 2 seconds. (The "Cruise Main" light in the cluster lights up.) Do
the same operation to deactivate Mazda cruise. (The Orange "Cruise Main" light
goes OFF.) Go to
Set / Coast Button
Programing Vehicle Speed
To program and memorize vehicle speed in cruise control, verify that the control arm and
, once the
"cruise main"orange indicator is ON, drive vehicle to a speed of at least
desired speed is reached press and release the
the accelerator pedal you should now be cruising at the desired speed.The "Cruise Main"
indicator should become green.
Setting Vehicle To A Slower Speed
Press and release the
you will decelerate approx 2 km/h, if the button is pressed and held vehicle will decelerate
until button is released.
Setting Vehicle To A Higher Speed
Press accelerator pedal to achieve the desired speed, then press and release the
<<Set/Coast>>
The "Resume / Accel" Button
In order to resume to pre-set vehicle speed after cruise control was deactivate by brake
peda, turn the
decelerate to the previous set speed.
Note: The resume function will only be available after the vehicle was previously
set to a desired speed.
Accelerating While In Cruise Mode
To accelerate to a new cruising speed, briefly turn the
should accelerate approx 2 km/h every time handle is turned. To set to a new cruising
speed you can also turn and hold the "
cruising speed is reached.
switch is used to enable the cruise control arm, it should be
OFF
is performed by sliding the
<<On / Off>>
Set / Coast button
section to program vehicle speed.
OFF
ON
<<Set / Coast>>
"Set / Coast"
button, every time the button is pressed and released
button, the vehicle will be set to the desired speed.
"Resume / Accel"
button, the vehicle will then either accelerate or
Resume / Accel"
ON
to
when not needed. Turning cruise
switch to the ON position.
50 km/h
, once the
button, slowly release
"Resume / Accel"
handle. Vehicle
button until the new desired
5
G8501A
2008-02