Automate AM2 Kullanıcı El Kitabı - Sayfa 10

Uzaktan Kumanda Automate AM2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Automate AM2 19 sayfaları.
Ayrıca Automate AM2 için: Kurulum Kılavuzu (18 sayfalar)

Sayfayı Yazdır

doors. The horn will honk twice (if connected and in audible

mode) and the parking lights will flash twice to confirm unlocking

of the vehicle. The status LED will turn off, unless the system is

programmed for Passive Mode. In Passive Mode, the status LED

will flash rapidly when the system is unlocked/disarmed. This indi-

cates that the system will re-engage the starter kill and re-lock the

doors (if Passive Locking has been programmed) in 30 seconds

unless the ignition is turned on.

note: If the system has been armed with the remote trans-

mitter, you must use the transmitter or the Valet switch

to disarm the system and deactivate the starter kill.

Manually unlocking the vehicle does not disarm the sys-

tem; it will only unlock the doors.

➜

disabling the system without a transmitter

If your remote transmitter is lost or damaged, you can manually

override the system. To do this, you must have the vehicle's igni-

tion key and know where the Valet

check with the installer for the location of the Valet

switch is located. Be sure to

switch.