Automate AM2 Kurulum Kılavuzu - Sayfa 9

Uzaktan Kumanda Automate AM2 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Automate AM2 18 sayfaları.
Ayrıca Automate AM2 için: Kullanıcı El Kitabı (19 sayfalar)

Sayfayı Yazdır

Peripheral Plug-In Harnesses

Integrated LED/Valet

The integrated LED/Valet

port on the side of the unit. Consider how the button will be used before choosing a mounting

location. Check for rear clearance before drilling a 5/16-inch hole and mounting the button. The

integrated LED/Valet

switch requires an 1-1/2 inches of rear clearance for mounting.

Super Bright LED, 2-Pin WHITE Plug

The super bright LED part of the integrated LED/Valet

plugs into the two-pin WHITE port. Make sure the LED wires are not shorted to ground as the

LED will be damaged.

LED/Valet

Switch

System Features Learn Routine

The System Features Learn Routine dictates how the unit operates. It is possible to access and

change any of the feature settings using the Valet

T T o o e e n n t t e e r r t t h h e e l l e e a a r r n n r r o o u u t t i i n n e e : :

2007

Directed Electronics

® ®

Switch, 2-Pin BLUE Plug

switch should be accessible from the driver's seat. It plugs into the BLUE

K K e e y y . . Turn the ignition on and then back off.

C C h h o o o o s s e e . . Within 10 seconds, press and release the Valet

the number of times corresponding to the feature number you want to

program. (See Feature Menus.) Once the Valet

pressed and released the desired number of times, press it once more and

hold it. After a second, the LED will flash and the horn will honk

according to the feature you have accessed.

switch operates at (+) 2 volts DC and

BLUE Plug

Valet Switch

WHITE Plug

LED

/Program switch.

/Program switch has been

/Program switch