ADEMCO VISTA 10 Hızlı Kılavuz - Sayfa 3

Güvenlik Sistemi ADEMCO VISTA 10 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. ADEMCO VISTA 10 3 sayfaları.

Ademco Vista 10 Quick Guide

users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user's code].

To add a duress code, simply add 1 digit higher than the master code. For example, if the master

code is 1234, the duress code will be 1235. *The duress code is used when a user is forced to arm

or disarm the system against their will.

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three

seconds for the keypad to verify.

For more information on this topic please visit the complete

Trouble Conditions

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key

will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your

attention. Check the specified zone area, close any open doors or windows and enter your security code

and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some

change in the environment of the protected area.

To silence trouble beeps, press any key or enter your security code and press [OFF].

For a complete list of Trouble Conditions, please refer to the

Troubleshooting

page.

Volume

The volume on the Ademco Vista 10 is not adjustable.

How can we help?

https://alpha.adt.com/help/39.html[11/8/2018 11:50:29 PM]

Ademco Vista 10

Safewatch and Ademco Systems

Return to Top

manual.