DayStar Filters QUARK Hızlı Başlangıç Kılavuzu

Sıhhi Tesisat Ürünleri DayStar Filters QUARK için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. DayStar Filters QUARK 16 sayfaları.

DAYSTAR FILTERS

QUARK

Congratulations on your purcha

se of a Quark Hydrog

en Alpha

"Eyepiece" solar filter. Please read this manual before using the product.

To use the filter, plug in the included power supply, then place the

Quark after your telescope's diagonal and insert an eyepiece or

camera in the rear of the filter. Turn the knob to point straight away

from the light. When the light turns green in about 5-10 minutes

your viewing experience can begin.

To prevent damage, we recommend using an Energy Rejection Filter on

telescopes of 80mm aperture or more, or when tra cking the Sun for long

periods. This can be a UV/IR cut filter mounted before the diagonal, or a

full aperture red or yellow glass ERF mounted in front of the telescope.

Warnings:

Do not disassemble the filter, the bl ocking element is separated from the

etalon and the complete ssembly must be used together for safe viewing.

Do n ot po wer the filter from a

computer or cell phone charger as the

Quark requires a high current power supply (> 1.5A) for operation.

For assistance:

Call:

1 (866) 680-6563

Visit: http://www.da

ystarfilters.com