Great River Technology ARINC 818 HS SAM Gen II Hızlı Başlangıç Kılavuzu - Sayfa 2
Kontrol Ünitesi Great River Technology ARINC 818 HS SAM Gen II için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Great River Technology ARINC 818 HS SAM Gen II 2 sayfaları. High speed stand alone module
Sayfayı YazdırGreat River Technology
•
After the install is complete, you can attach your HSSAM unit to the USB port.
Using the HS SAMView2 software
The HS SAMView software provides an easy
way to load and retrieve images and data
to/from the HS SAM unit over USB. Consult
the User Manual for the HS SAM Gen II
located in the installed directory:
C:\GreatRiverTech\HSSAM\Doc\ HSSAM2-
ARINC-818-UserManual.pdf.
The HS SAMView software enables loading
and retrieval of ARINC 818 image and header
data to and from the unit.
Confirm that the rocker switch is set to Run, the
center position.
Using the HS SAM
The rocker switch has three positions:
•
Reset—Resets internal electronics and returns all ARINC 818 outputs to idle.
•
Run—Accommodates normal operation.
•
Test Pattern—Transmits canned test-pattern video instead of source video to ARINC 818 or DVI
output (only in units with test-pattern capability).
There are six LED status lights:
•
Power—The unit is currently powered and ready.
•
RX Preset—The unit has detected a DVI or ARINC 818 video output.
•
RX Valid—The input video source is valid.
•
TX Valid—The DVI or ARINC 818 output is valid.
•
Test Pattern—For units with test-pattern capability, test patterns are being transmitted on the
ARIC 818 or DVI output.
•
Fault—An input error has been detected.
HS SAMView2 main screen
2
Quick Start Guide: HS SAM Gen II