HiB Prima Manuel - Sayfa 3

Banyo Armatürleri HiB Prima için çevrimiçi göz atın veya pdf Manuel indirin. HiB Prima 4 sayfaları.

Sayfayı Yazdır

Prima & Duet Vanity Units

1. Position the unit in a suitable location.

Carefully mark the desired position of the unit

using a soft pencil.

2. Using a spirit level, mark a horizontal line

below the pencil mark, taking into account

the location of the furniture hangers. Bend

and break the wall brackets as shown in

Fig. 1

and place brackets on the pencil line

paying attention to the distance between the

furniture hangers. Carefully mark the position

of the holes using a soft pencil.

3. Before drilling, ensure there are no

hidden cables or pipes behind the

mounting points. Using a suitable drill bit,

drill holes in the marked positions to a suitable

depth.

4. Insert wall plugs level with the surface of the

wall. If fitting to a tiled surface, wall plugs

should be inserted below the tile surface to

avoid cracking. NB. For plasterboard walls,

specialist heavy duty fixings should be

purchased from any DIY or hardware store.

5. Fix the brackets to the wall using the screws

provided

(Fig.

2).

6. Hang the furniture unit, ensuring the claws on

the hangers are securely located on the wall

brackets. Using a spirit level, make the unit

level by adjusting screw B on the hangers

3). Once straight, tighten screw A until the

unit is secure against the wall.

7. If necessary, the drawer runners can be

adjusted in order to realign the drawer front(s)

(Fig.

7).

8. Lastly, mount the basin onto the furniture

unit using a fine bead of silicone to seal the

washbasin to the unit and wall edges.

Mirrored Cabinets

1. It is recommended that the door(s) are

removed from the mirrored cabinets prior to

installation for ease. Doors can be removed

by unclipping the hinges (there is a releaase

catch at the back of the hinge - see

They can be reattached by reversing this

action and pushing the hinge back on to the

mounting plate until they click into place.

2. To install the mirrored cabinets, follow

3. If necessary, the door(s) can be adjusted to align

them with the cabinet carcass. This is done by

adjusting the small screws on the hinges (see

Fig.

Tall Units

1. Please note that the tall units can be

mounted as both right hand and left hand

door opening.

(Fig.

2).

2. Position the unit in a suitable location. Carefully

mark the desired position of the unit using a soft

pencil.

3. Using a spirit level, mark a horizontal line below

the pencil mark, taking into account the location

of the split baton style furniture hanger. Place

mounting baton on the pencil line and carefully

mark the position of the holes using a soft

pencil.

4. Before drilling, ensure there are no

hidden cables or pipes behind the

mounting points. Using a suitable drill bit,

drill holes in the marked positions to a suitable

depth.

5. Insert wall plugs level with the surface of the

wall. If fitting to a tiled surface, wall plugs

should be inserted below the tile surface to

(Fig.

avoid cracking. NB. For plasterboard walls,

specialist heavy duty fixings should be

purchased from any DIY or hardware store.

6. Fix the mounting baton to the wall using the

screws provided

7. Hang the tall unit onto the wall baton, ensuring

that it is securely seated.

8. If necessary, the door(s) can be adjusted to align

them with the tall unit carcass. This is done by

adjusting the small screws on the hinges (see

Fig.

9. In order to adjust the position of the shelves

(please note that the centre shelf is fixed and

not removable), the doors must first be removed

(see

Fig.

6).

process). Once the door is removed, simply

remove the shelf studs and reinsert them in the

required position. Replace doors.

of the vanity unit installation process.

(Fig.

5).

(Fig.

5).

8).

step 1

of the mirrored cabinet installation

steps 1 to

hib.co.uk