DAYTAI DT-OLS-116 Kullanıcı Kılavuzu - Sayfa 5

Aydınlatma Ekipmanları DAYTAI DT-OLS-116 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAYTAI DT-OLS-116 16 sayfaları. Optical light source

Sayfayı Yazdır

Chapter 4 Function

4.1Front

(1)

(2)

(3)

(1)

Power Key

ON/OFF the instrument

Power Saving setting: the unit will automatically shut off after 10 minutes idle time, Once choose this

setting, the "auto-off" will display on the left bottom of the screen. This power saving is the default

setting, once open the power meter, will enter into this mode.

(2)

Wavelength Selection

After on the tester, first press

the current wavelength on the left top of the screen.

backlight control. THE LIGHT SOURCE have two type of backlight control,

(3)

choose one mode:

"LDR" the intelligent backlight control mode. Power meter will off/on the backlight within 15second based

on the outside light condition, and this is the default mode.

Back light control key mode. Press

Optical Light Source (DT-OLS-116)

4-1

to laser on, then press

to on/off the back light

(10)

(9)

(8)

(7)

(6)

(5)

(4)

to select the wavelength and display

press