DAYTAI DT-OLS-116 Kullanıcı Kılavuzu - Sayfa 9

Aydınlatma Ekipmanları DAYTAI DT-OLS-116 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAYTAI DT-OLS-116 16 sayfaları. Optical light source

Sayfayı Yazdır

Battery Power indicate

There are 5 Grades for the battery power indication：

left 70%～100% electricity

left 40%～70% electricity

left 30%～40% electricity

left 20%～30% electricity。

not enough electricity, left less than 20%，the power meter will be forced power off.

Fit the battery，refer to below figure 5-2

Press the clip fastener on the battery compartment cover down. Remove the battery compartment cover,

remove all three batteries making a note of their positive and negative connector orientation. The negative

battery connector should be against the spring. Insert 3 new 1.5VV AA battery. Refit the battery compartment

cover. The clip fastener should click shut.

Notice ： Make sure that you insert the batteries with their positive and negative connectors

correctly aligned.

5.1.2 Power Supply Unit

When the battery is used out, can use the power supply unit, and at this time on the left top of the screen,

there will be a

will choose AC power supply as the priority.

(5-3)。 When the battery in the power meter, and still have enough electricity, the tester

Optical Light Source (DT-OLS-116)

5-1

5-2