Great Wall V200 Manuel - Sayfa 11

Otomobil Elektroniği Great Wall V200 için çevrimiçi göz atın veya pdf Manuel indirin. Great Wall V200 19 sayfaları. Keyless entry and immobilizer

SA220 (Sailor) Programming Method "A"

Procedure A

1. Remove the LHF kick panel to gain access to the Central Locking

controller.

2. Refer to the diagram below and earth out pin 9 three times (the door

locks will cycle during this process).

3. Press the Lock button on all remotes one at a time to lean the remotes.

4. Remove the earth wire and refit the module and trim.

NOTE:

The ignition key should not be in the ignition during this procedure.

(If you are unsuccessful try Earthing Pin 9, 5 times or attempt Procedure B on next page)