DAYTEK SINGLE Ürün Kılavuzu - Sayfa 3

Raflar ve Standlar DAYTEK SINGLE için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. DAYTEK SINGLE 8 sayfaları. Easy lock fold down clotheslines

Sayfayı Yazdır

WALL MOUNTING INSTALLATION

Tools required for installation:

•

13mm spanner

•

10mm spanner

•

Spirit level

•

Tape measure

•

Pencil

•

Hammer drill + suitable drill bit

•

Wall fixings (to suit your chosen

installation surface)

•

Scissors

INSTALLATION PROCEDURE

1. MOUNTING LOCATION

For best drying results, select a location that

receives maximum sunlight and airflow.

Ensure that the area has sufficient clearance around

the clothesline. We recommend 100mm clearance

each side and 500mm in front of clothesline frame

when open (refer to frame size on page 1 of manual).

FIGURE 1

170mm (Distance

between holes)

Users

Height

100mm

Important:

Mounting hardware required will vary depending on the surface

of the wall the Clothesline will be mounted to.

When mounting to concrete, brick or masonry walls we recommend

Daytek 8mm Marine Grade Anchor Bolts (Sold separately).

For wood or other specialised materials please consult your local

hardware store or professional for advice.

Never attach clothesline to mortar between brickwork. Ensure fixing

surface is structurally sound.

Install away from Heating or Cooling Units.

Mounting Width

Centre to centre fixing points for installation,

Mini — 1520mm / Slim, Single — 2220mm

Mounting Height

The recommended mounting height for the top hole

in the wall bracket is:

User height +100mm

Minimum mounting height 1500mm

Note: always consider the main users height and the

length of the items you plan on drying.

WALL BRACKET CENTRES

MIINI FOLD DOWN 1520mm

SLIM FOLD DOWN 2220mm

SINGLE FOLD DOWNS 2220mm

Note: Clothesline shown in fold down position

GROUND LEVEL