HIBLOW hp-40 Manuel - Sayfa 4

Havuz Pompaları HIBLOW hp-40 için çevrimiçi göz atın veya pdf Manuel indirin. HIBLOW hp-40 5 sayfaları.
Ayrıca HIBLOW hp-40 için: Kullanım Kılavuzu (13 sayfalar)

Sayfayı Yazdır

HP- 10〜50

CAUTION

！

●Be sure to unplug the pump unit.

●When performing replacement work, the pump body may be still hot and you may get

burnt. Therefore, wait until the pump has been allowed to cool.

●Be sure to remove the chamber block and the actuating rod before replacing the

electromagnet.

●It is better to let an experienced technician handle the soldering process.

Take precautions against being burnt.

●In case of HP-10/20, do the same way of replacing the electromagnet.

STEP

REMOVING THE ELECTROMAGNET

Cut the wire from the terminals on the

electromagnet with nippers.

●It is recommended that you make a note of the wiring.

STEP

Remove the nuts with the box driver.

(7mm wrench.)

STEP

Pull out electromagnets from the pump body.

REPLACING THE ELECTROMAGNET